您的浏览器版本太低,请使用IE9(或以上)、谷歌、火狐等现代浏览器。360、QQ、搜狗等浏览器请使用极速模式。
学院发表文章

A semi-analytical Robin boundary extension for the infinite line source model that accounts for convective heat transfer in heat-pulse measurements

发布日期:2026-10-25浏览次数:信息来源:土地科学与技术学院

Zhao, Tianyue;    Lu, Yili;    Horton, Robert;    Ren, Tusheng

Abstract

Accurate determination of near-surface soil thermal property values with the heat-pulse (HP) method is essential to quantify energy and mass transfer across the soil-atmosphere interface. However, heat exchange at this interface is bound to violate the underlying adiabatic or isothermal boundary assumptions of the HP method. This study overcomes this limitation by using a Robin (third-kind) boundary condition instead of a zero-flux boundary condition in the infinite line source (ILS) model, hereafter termed ILS-RBC. A surface apparent heat transfer coefficient (h) is used to quantify boundary heat exchange. The performances of the ILS model, the adiabatic extension (ILS-ABC), and the ILS-RBC model were evaluated using finite-element simulations and wind-tunnel experiments across a range of surface heat transfer intensities and sensor depths (z). The ILS-RBC model accurately reproduced non-adiabatic near-surface temperature responses, with simulated HP signals matching observations closely (RMSE < 0.017 degrees C). In contrast, the ILS and ILS-ABC models exhibited substantial biases that varied systematically with h and sensor depth, with thermal conductivity (lambda) showing the greatest sensitivity. At z = 1 mm, as h increased from 0 to 20 W m(-2) K-1, lambda estimates from the ILS and ILS-ABC models deviated by over 29%, while the ILS-RBC model kept variations within 2% and errors below 3%. The ILS-RBC model provides a theoretical representation considering non-adiabatic convection conditions for near-surface HP measurements.


A semi-analytical Robin boundary extension for the infinite line source model that accounts for convective heat transfer in heat-pulse measurements.pdf